Field guides / Performance (Gen 3)
Performance (Gen 3) — install
Kit setup, mount guides and on-site checks for the enterprise Performance terminal.
The Starlink app is for obstruction checks and alignment only
Pulsar-managed terminals are reseller-provisioned, so you cannot sign in to Starlink from the app — service, plan changes and monitoring go through Pulsar.
Which mount are you fitting?
Only the mounts Pulsar sells are listed. Each opens the official Starlink guide.
Pipe Adapter$59Open install guide (PDF) →
Flat Mount$106Open install guide (PDF) →
Wall Mount$106Open install guide (PDF) →
Wedge Mount$94Open install guide (PDF) →
Obstruction check & alignment
In the box
- Performance Antenna
- Advanced Power Supply
- Starlink Performance Cable 25 m (82 ft)
- AC Power Cable 1.5 m (5 ft)
- DC Power Cable 1.5 m (5 ft)
- Ethernet Cable 5 m (16.5 ft)
Site specification
| Specification | Value |
|---|---|
| Dimensions | 24.0 × 15.6 × 1.6 in |
| Weight | 11.5 lb |
| Peak download | 475 Mbps |
| Peak upload | 75 Mbps |
| Latency | 30–70 ms |
| Field of view | 140° (4 satellites) |
| Power draw | 75–100 W |
| Wind rating | 170+ mph |
| Snow melt | 3.5 in/hr |
Cables & extras
| Specification | Value |
|---|---|
| 5 m Ethernet | $39 |
| 5 m Performance cable | $39 |
| 25 m cable | $112 |
| 50 m (164 ft) cable | $165 |
| Router (without power supply) | $141 |
Before you leave the depot
- Open and read the mount guide for this job — you may have no signal on site
- Confirm cable length reaches from the mount point to the router location
- Starlink app installed and phone charged (obstruction check needs the camera)
- Mount hardware, sealant and fixings suited to the roof or wall material
- Ladder, fall protection and PPE appropriate to the site
- Pulsar support number saved offline: 512.906.6563